Here are the basic elements of an SG Timer.
Screen located on the front has a resolution of 172 pixels per inch. Automatic backlight is controlled by the light sensor above the screen. The timer is equipped with an accelerometer, so the interface will adjust to timer orientation. You can turn it off in settings.
Below is a shot sensor.
On the left side you can see three buttons: up and down buttons for menu navigation and a middle button. The same button in the middle is used to turn on the timer. To do this, you need to squeeze it and hold it for a few seconds.
Charging port for Type-C cable is right here along with the lanyard hook.
On the back side there’s your buzzer and the wireless charger. You can use any QI charger.
Timer is equipped with magnets to attach to the U-Grip or to any metal surface.
The body protects the timer from dust and water.
