SG Pulse can run for up to 600 two-minute stages on a full charge.
The battery level is shown both in the Drills app (by clicking the device icon) and directly on the unit itself.
To charge SG Pulse, please use the cable that comes with the device. Charging from 0 to 100% takes approximately 2,5 hours.
The cable is magnetic, so please attach the cable according to the magnet’s polarity.
First connect the cable to the SG Pulse Pro, then connect it to the 5v USB charger. When finished charging, unplug the cable from the charger first and then disconnect it from the SG Pulse Pro.
Important ⚠️ Don’t try to use any other cables for charging SG Pulse, and don’t try to use this cable to use other devices besides SG Pulse Pro. Never leave the cable plugged into the charger when not in use.
To save battery life, the device is programmed to automatically power off after 30 minutes of inactivity. The auto-shutdown countdown resets whenever you press any button, start a session, or change the device orientation from horizontal to vertical (or vice versa).
